Bosch Heat Pump Installation in Danvers, Massachusetts
The Martin family had recently renovated their Danvers, MA home. After their renovation, they noticed their kitchen wasn’t nearly as comfortable as the rest of their home. The extreme temperatures in New England would make any room that is not heated or cooled properly very uncomfortable.
The Martin’s called Townsend Energy to discuss the best way to ensure their newly renovated kitchen would be as comfortable as the rest of their home. We advised the Martin family to have a Bosch heat-pump with ductwork installed in their Danvers, MA home.
Problem: The Martin’s open kitchen was uncomfortable after remodeling the inside of their home.
Solution: We installed a Bosch heat-pump, air-handler unit, and necessary ductwork in their Danvers home.
Heat Pump Upgrade in Danvers, Massachusetts
Having a properly installed heating and cooling system is essential for any home or business in New England. In the case of the Martin family, we installed a Bosch Heat Pump IDS 2.0 heating and air conditioning system with necessary ductwork.
As part of this Danvers, MA inverter ducted split system installation, we used the following materials: Bosch 5 ton heat pump Bova-60 series 2.0 to be placed outside of the home on a preformed concrete pad, a Bosch 5 ton multi variable speed air handler (model 8733952442) installed in the attic with a secondary drain pan, and ceiling saver switch.
The new system will be using R410a refrigerant, as well as computerized load calculations of the home, complete new insulated and sealed ductwork system for additional zones, all trunk duct to be hard piped, all supply runs to be flex duct as the existing system is, new 8″ supply drop down to kitchen area for proper cooling, new duct to run exposed thru bedroom closet down to the kitchen ceiling, new zone dampers installed in the existing trunk and new trunk, zone first control panel with bypass eliminator.
As part of this same project, we installed two new Ecobee WiFi thermostats (one for each zone of cooling and heating), an insulated refrigeration line set to be run from air handler to condenser, along the outside of the home. We also installed all necessary wiring of new equipment and zoning, complete refrigerant charge, and miscellaneous parts and fittings for this project.
Bosch has been a leader in the Thermo technology industry since its start in 1886. They are known for their high-quality heating and comfort systems built in the USA. Their products are manufactured with rigorous standards and factory testing to ensure high-efficiency operation over the life of their systems.
The innovative Bosch air-source heat pump system utilizes maximum efficiencies to achieve ultimate comfort while keeping noise levels to a minimum.
Features of a Bosch Heat Pump:
- 20.5 SEER efficiency ratings
- Energy Star certified
- 10-year residential limited warranty
- Operates in heating down to -40 F
- Outdoor coil contains a copper tube with hydrophilic aluminum fins
- 56,000 BTU/hr
- Quiet and efficient operation with its ten-speed ECM outdoor motor
- Inverter drive compressor
- Operates in cooling up to 1250 F
- Whisper-quiet operation (56 dB)
- Small and compact design
- Easy to install
Bosch IDS 2.0 High-Efficiency Outdoor Condensing Unit
Intuitive and intelligent control features assist in adjusting the output capacity. This control allows the unit to set temperatures at your preferred levels without it fluctuating. It will also help keep humidity levels down during the summer season. No matter if it’s summer or winter, the unit keeps your home comfortable and allows your climate temperatures set to your desired taste.
The outdoor condenser allows for all conditions to optimize the unit’s process to the highest efficiencies possible. An electronic expansion valve comes standard with the condensing units to ensure proper refrigerant flow for a smoother operation.
Bosch IDS 2.0 Indoor Air Handler
This unit accommodates additional heat on-demand when you need it most by combining next-gen technology with a durable, long-lasting design. The features of this indoor unit are:
- All-Aluminum Coil – the all-aluminum coils are durable and allow for excellent efficiency, heat transfer, and humidity removal. It also has a much lower chance of refrigerant leaking compared to standard copper coils.
- Two-stage ECM Motor – Indoor blower motor goes down and up to provide enhanced humidity control, energy savings, and superior comfort.
- Foil-faced Insulation – insulated inner walls help to decrease energy loss and virtually eliminates condensation.
- Painted Galvanized Steel Cabinet – salt spray tested for maximum corrosion resistance and durability.
Air To Air Heat Pump Installation in Danvers, MA
No matter the type of system installed in your home, a heat pump can supplement the heating or cooling in specific rooms that are uncomfortable. In the Martin family’s home, they already had an HVAC system installed and needed to supplement the heating and cooling for their kitchen.
Heat pumps allow for both the cooling and heating of any home or business by pulling the heat out of the air in winter and pushing is through refrigerant to warm the home. Alternatively, in the summer, the same system will pull cool air from the outside air and push it through refrigerant to cool your home.
If you or any of your friends or family are in need of an efficient way to both cool and heat your home, a heat pump is a great solution. Call the professionals at Townsend Energy to schedule a complimentary, in-home consultation with one of our heat pump experts.
Danvers Heat Pump Installation FAQs
Table of Contents:
- Heat Pump Upgrade in Danvers, Massachusetts
- Bosch IDS 2.0 High-Efficiency Outdoor Condensing Unit
- Bosch IDS 2.0 Indoor Air Handler
- Air To Air Heat Pump Installation in Danvers, MA
- Danvers Heat Pump Installation FAQs
- Townsend Energy: Danvers, MA Heat Pump Experts
How Often Should HVAC Systems Be Serviced in Danvers, MA?
We recommend having your ducted heat pump system cleaned and maintained once a year. This routine maintenance will help elongate the life of the unit. After a couple of years, we recommend having the filters changed. Air quality, pollutants, and additional factors may change when these filters should be changed.
How Much Does A Heat Pump Cost To Install?
A heat pumps cost is dependent on the size of the unit and the brand that is being installed. Other factors such as labor costs should also be considered. We recommend calling Townsend Energy to have an in-home consultation with one of our heating experts.
How Long Does It Take To Have A Heat Pump Installed?
The time it takes to have a heat pump installed can vary based on where the unit will be placed and if new ductwork will need to be installed. Other factors such as the removal of older HVAC systems and accessory materials need to be considered.
Townsend Energy: Danvers, MA Heat Pump Experts
If you live in the Danvers, Massachusetts area, and need a heat pump installation or any HVAC services, contact the professionals at Townsend Energy! We offer you peace of mind with our skilled team certified contractors. We perform the work, just like it was our own home for your total satisfaction.
We offer a complete satisfaction guarantee for the work we perform, ensuring you are satisfied with our work. Customer satisfaction is our top priority for all our customer’s projects.
Whether you need heat pump repair, a new mini-split ducted heat pump installation, or heating system upgrade, we are here to help. Call us today at (800) 888-2888 to see what Townsend Energy can do for your heating needs!
Check Out Our Reviews In Danvers, MA:
for Danvers, MA
Rhonda - Danvers, MA
I met with a total of 6 plumbing/heating contractors for replacement of my FHW oil system to gas. Townsend's Specialist was the most detailed in reviewing my current system and determining the best set up and equipment to get provide maximum efficiency. The installation was incredible - clean and neat from start to finish. I love the new system. Separate zones for the bedrooms will save money as well as provide greater comfort. Thank you Townsend!
Very professional. Very happy with the service.
Christian - Danvers, MA
Rosemarie - Danvers, MA
Excellent job very pleased friendly i request him every year bery thorough
Great Service! very knowledgeable
Corrie - Danvers, MA
Tony from Townsend Oil was amazing during an emergency call due to an oil leak in our basement! He was able to locate the hole in the tank plug it and contain the spill while walking us through what we will need to do and what to expect in the next few days to get the house cleaned up and the tank replaced.
Always A+ service from tony pep.
Sharon - Danvers, MA
Townsend has been right there for our fuel and service needs.the office when you call has great customer service always friendly and helpful.the serviceman when necessary is knowledgeable and neat .
Jan - Danvers, MA
Brian M is knowledgeable, focused on efficient technical excellence, while being customer centric.
Fast, efficient, knowledgeable technician. Service above and beyond.
Donna - Danvers, MA
I called Townsend Energy at eight o’clock this morning==no central air on the hottest day of the year. The technician,Michael, was in and out, extremely efficient, and a pleasure to have service our central air. Michael most definitely is a big asset to Townsend Oil.
Awesome Service. Exceptionally prompt response.
Deodatta - Danvers, MA
Excellent diagnosis of the problem, and prompt exceptional service to resolve the issue. Brian’s dedication and passion to get the job done perfectly is worth noting as above and beyond the call of duty. Thanks to both Brian and Townsend management for your great work.
Amazing service by Harry!!
Sheri - Danvers, MA
Harry went over and above what any other serviceman has done for us. He came to fix our heating and air conditioning, and when I mentioned that a noise in my son’s bedroom (that may or may not be related to the AC unit) had been keeping him awake st night for the past TEN years, Harry was happy to accept the challenge and try to help us find the cause. It took him only a few minutes to point out a rusty nail entering the house where a cable wire entered, and it ended up being the cause! I had thought it may be the AC piping in the wall, and almost had a hole cut in my son’s bedroom wall to determine the source of the noise. Harry was so kind, and was thrilled to be presented with a challenging problem. We are so grateful to Harry, not only for keeping our house cool in the summer and wRm in the winter, but for his expertise and genuine kindness. He is truly an employee that all others should strive to be like!
Professional respectful and efficient
Marty - Danvers, MA
Re-chased threads on 5” Carlin Draw assy, to restore heat & hot water. Installed new relief valve onto hot water tank. Troubleshot hot water tank overheating condition with customer. New Tank Aquastat and Burner parts, to be scheduled for replacement. Brian M.
Installed new expansion tank air vents relief valve and main air vent on well McLain heating system
Serviced Beckett oil burner on Miller furnace. Developing solution to add De-aireator Tiger Loop. Engineering Dept will call with information.
Serviced Propane hot water tank. Cleaned Burner and Pilot assy. Installed new part and tested ignition operations and combustion emissions.
Tuned up Two Olsen warm air furnaces and tested combustion to factory specifications.
Tuned up Fujitsu Ductless 3 zone system. Tested temperatures and pressures to factory specifications.
Maintenance on a gas boiler
Heating System Installation
Installed new Digital Aquastat Control to accurately sense Buderus hot water temperature.